Indeed, there are multiple approaches to wiring lights in your vehicle. One uncommonly used method involves drilling and routing wires through the vehicle. However, at KC, we highly recommend a simpler and more convenient wiring technique, especially for overhead lights. This method entails running the wires down the windshield and making use of our Universal Wire Hider.
The KC Universal Wire Hider, equipped with 3M™ VHB™ double-sided adhesive, is as straightforward as it sounds. It consists of a 3.3 ft (40") strip of rubber extrusion featuring an internal channel capable of concealing wires up to 8mm in diameter. This design allows for a clean installation of off-road lights and other accessories. This automotive wire management solution is perfect for those who are tired of having exposed wires running along their windshield, roof rack, frame, or anywhere else on their vehicle. By using our Universal Wire Hider, you can achieve a clean and professional appearance without the hassle of drilling into your vehicle's roofline.
Please Note: Cleaning the Rubber Strip and your chosen Mounting Surface is vital to the integrity of the installation. Any dirt or debris will compromise the adhesion of the 3M™ VHB™ double-sided adhesive and may cause the Wire Hider to come loose. We've supplied an Alcohol Swab pack with the Wire Hider for this purpose.
Included in the box:
(1x) Rubber Strip - 40" (3.3') x 3/4"
(6x) 3M™ VHB™ double-sided adhesive - 6" x 3/8"
(1x) Alcohol Swap - Isopropyl Alcohol 70%
(1x) Installation Guide - KC 6300 Universal Wire Hider
Comments
0 comments
Please sign in to leave a comment.