Alonso Parra

An IP (Ingress Protection) rating tells you how well a light is sealed against dust and water. The first number is dust protection, and the second is water protection.IP67: Dust-tight and protected...

Please refer to the pictures below to Identify the Beam Pattern of your Gravity Titan LED Light Insert. The easiest way to ID the Inserts by Beam pattern is to look at the fluting at the front bott...

If you recently received an email or call from KC HiLiTES that wasn't about an order update, shipping notice, or promotion, here's what it was about.What is this outreach?From time to time our Cust...

SummarySome KC Wire Hider V2 K-Clips are currently shipping with a slightly smaller piece of 3M VHB tape than intended. This can make the clips difficult to apply securely in certain mounting locat...

What is the GORE Vent?Every Gravity Titan light includes a small component called a GORE Vent, sometimes referred to as a breather vent. Its job is to: Equalize air pressure inside the light housin...

Watch KC HiLiTES' installation walkthrough for the ditch mount brackets on the 6th Gen 4Runner below. If you experience fitment or clearance issues with your ditch mount bracket or hood prop system...

Jeep only puts two different front bumpers on the Wrangler (JL) and Gladiator (JT), no matter which trim badge is on the fender: a plastic bumper and a steel bumper. Which one you have determines w...

If you're behind the wheel of a classic like a Bel Air, a Camaro, a vintage Bronco, an old F100 then chances are you didn't buy it to look modern. You bought it for the character. But there's one p...

Why this happensThe corrosion issue stems from a breach in the faceplate's protective coating during assembly or lens swapping. The FLEX Era 4 utilizes an aluminum alloy faceplate finished with a p...

Short AnswerIf your order was cancelled shortly after you placed it but before you received a shipping confirmation, it was most likely stopped by our automated payment security review, not by KC H...